Extended-insertion remote process refractometer for representative Brix and concentration measurement in tanks, vessels and large-diameter pipelines.
PTR100-T is the extended-insertion configuration of the PTR100 inline refractometer platform, developed specifically for tanks, vessels and large-diameter process pipelines. It uses the same optical measurement system, electronics, process-control functions and remote operator interface as PTR100, while the longer sensor head allows the sapphire prism to reach further into the process medium.
In large process pipes, flow velocity close to the wall can be lower than in the central flow region. Product layering, incomplete mixing or local concentration differences may also occur near the wall. Positioning the prism further into the process stream helps the refractometer measure a more representative portion of the bulk liquid.
The extended probe also helps in processes where coating or product deposition is more likely near the vessel or pipe wall. Better exposure to the moving process stream can reduce the tendency for deposits to remain on the optical surface, while the integrated Prism Wash Control provides automatic or manual cleaning when additional protection against fouling is required.
For tank and vessel installations, the longer probe enables the optical measurement point to be positioned farther inside the vessel and closer to the actively mixed process zone.
The extended-insertion design is also useful where the vessel wall, mounting nozzle, insulation or jacket increases the distance between the external mounting point and the actual process liquid.
PTR100-T uses Total Internal Reflection and critical-angle detection to measure refractive index. Its 589 nm optical system, sapphire prism and 3648-pixel linear CCD provide a measuring range from 1.32500 to 1.54000 nD and 0 to 100 °Bx. Product-specific concentration values are calculated through configurable nD-to-concentration tables with automatic temperature compensation from the integrated Pt100.
The remote architecture keeps the process sensor at the measuring point while the separate 4.3-inch touchscreen transmitter/control panel can be installed in the monitoring or control room. Two configurable analog outputs, digital inputs, relay outputs, PID functions, alarms, Modbus RTU, data logging and USB/CSV export provide the same monitoring and process-control capabilities as PTR100.
PTR100-T uses a Stainless Steel 316L wetted sensor head, Sapphire optical prism and Viton process seal. It supports process temperatures from −20 to +120 °C, process pressure up to 12 bar and CIP/SIP cycles up to +140 °C for 30 minutes.
| Product Family Name | PrismaTech refractometer series |
|---|---|
| Product Type | PTR100-T |
| Measurement Principle | Refractive index |
| Measurement Paremeters | Brix, Refractive index and Temperature |
| Contact to measured medium | Yes |
| Refractive Index Range | 1.32500-1.54000 |
| Brix Range | 0-100%Brix |
| Measured Media | Liquids |
| Ambient temperature | 0 to +50°C |
| Power supply (VAC) | 110-240 VAC |
| Power supply (VDC) | 18-30 VDC |
| Process pressure | "Max.16 bar |
| Process temperature | 0-120°C |
| Wetted Parts Material | AISI316L,PTFE,Titanium,Sapphire |
| Prism Material | Sapphire |
| Connections | 3A Clamp DN63 |
| Analogue outputs | Two units 0/4…20 mA (Brix, Temperature, PID controller, etc.) |
| Digital inputs | Two units |
| Output relays | Three Units (6A) (alarm,limits,system ok,etc.) |
| Communications | Modbus RTU (RS485) |
| Cable connection | Gland PG 11, M12 8pin |
| USB port | "One port for transferring |
| Measurment Accuracy | ±0.07% Brix |
| Sensor protection | IP67 |
| Transmitter protection | IP66 |
| Display | 4.3" touch screen |
| Transmitter | Remote |
| Transmitter Dimensions | 290×160×85 mm |