Inline Refractometer PTR100-CPT

Product Specifications

Compact all-in-one process refractometer for continuous Brix and concentration measurement directly at the process line, with integrated display and control electronics.

  • All-in-one compact architecture with sensor, transmitter, display and I/O integrated in one unit
  • Full 0 to 100 °Bx and 1.32500 to 1.54000 nD measuring range
  • ±0.07 °Bx accuracy with 0.01 °Bx resolution
  • 600 ms measurement cycle with configurable damping
  • Integrated Pt100 and automatic temperature compensation
  • Configurable analog and digital I/O with PID and Prism Wash control
  • 2.4-inch IPS TFT color display and Modbus RTU over RS-485

Description

PTR100-CPT is the compact all-in-one configuration of the PTR100 process refractometer platform. The optical sensor, transmitter electronics, color display, process I/O and communication interface are integrated into a single assembly installed directly at the measuring point, eliminating the need for a separate remote control panel.

The instrument uses Total Internal Reflection and critical-angle detection to determine refractive index. A 589 nm LED illuminates the Sapphire prism, while a 3648-pixel linear CCD detects the optical shadow boundary used to calculate the critical angle. An integrated Pt100 simultaneously measures process temperature.

PTR100-CPT covers a refractive-index range from 1.32500 to 1.54000 nD and the full Brix range from 0 to 100 °Bx. Refractive-index accuracy is ±0.0002 nD with ±0.0001 nD repeatability, while Brix accuracy is ±0.07 °Bx with ±0.05 °Bx repeatability. Measurement resolution is 0.00001 nD and 0.01 °Bx.

Product-specific concentration measurement is supported through user-configurable nD-to-concentration conversion tables. The integrated Pt100 and automatic temperature compensation allow the analyzer to convert refractive-index data into temperature-compensated Brix or product-specific concentration values.

A 600 ms measurement cycle supports continuous process monitoring, while configurable damping allows the response to be adapted to changing process conditions by filtering a selectable number of measurement cycles.

The compact electronics provide one configurable 0–20 mA or 4–20 mA analog output for refractive index, Brix, concentration, temperature or PID controller output. One 24 V digital-output channel is permanently available, while a second channel can be configured either as a 24 V digital output or as a digital input. Gain/offset adjustment and analog open-loop diagnostics are integrated into the instrument.

PTR100-CPT also supports PID process control and prism-wash logic. The digital outputs can provide pump and valve command signals for an external prism-cleaning system; external relays are used where higher-power switching is required. This enables automatic or manual cleaning in applications where coating or product deposition may affect the optical surface.

Local operation is provided through an integrated 2.4-inch IPS TFT color display with four touch keys. Measurement settings, I/O assignments, alarms, PID parameters, damping and prism-wash settings can be accessed directly at the process location, while Modbus RTU over RS-485 provides digital integration with PLC and automation systems.

The wetted sensor head is manufactured from Stainless Steel 316L with Ra ≤ 1 µm surface roughness and uses a 99.997% Al₂O₃ Sapphire prism with Viton process sealing. PTR100-CPT supports process temperatures from −20 to +100 °C, process pressures up to 12 bar and CIP/SIP cycles up to +120 °C for 30 minutes.

0/5 (0 Reviews)

Features & Options


Compact All-in-One Architecture
  • Optical sensor, transmitter, display and I/O integrated in one assembly
  • No separate remote control panel required
  • Direct local access at the measuring point
  • 8-pin M12 electrical connection
  • Compact installation for process lines and equipment

Optical Measurement
  • Total Internal Reflection / Critical-Angle Refractometry
  • 1.32500–1.54000 nD
  • 0–100 °Bx
  • Product-specific concentration scales
  • 589 nm LED
  • 3648-pixel linear CCD
  • Sapphire prism

Measurement Performance
  • ±0.0002 nD accuracy
  • ±0.07 °Bx Brix accuracy
  • ±0.0001 nD RI repeatability
  • ±0.05 °Bx Brix repeatability
  • 0.00001 nD / 0.01 °Bx resolution
  • 600 ms measurement cycle
  • User-configurable damping

Temperature & Concentration Compensation
  • Integrated Pt100
  • Automatic temperature compensation
  • User-configurable nD-to-concentration tables

Process Construction
  • Stainless Steel 316L wetted head
  • Ra ≤ 1 µm
  • Sapphire prism, 99.997% Al₂O₃
  • Viton process seal
  • Sanitary Clamp, 63 mm
  • 12 bar
  • −20…+100 °C
  • CIP/SIP +120 °C / 30 min
  • IP67

Electrical & Process Control
  • 1 × configurable 0–20 / 4–20 mA analog output
  • Gain / Offset adjustment
  • Analog open-loop diagnostics
  • Up to 2 × configurable 24 V digital outputs
  • Channel 2 selectable as digital output or digital input
  • PID process control
  • Process alarms and system-status functions

Prism Wash Control
  • Automatic / manual wash logic
  • Pump and valve command outputs
  • External relays for higher-power loads
  • Adjustable wash sequence through integrated interface

Communication & Operation
  • Modbus RTU over RS-485
  • 2.4-inch IPS TFT color display
  • 240 × 320 resolution
  • Four touch keys
  • Full local configuration

Calibration
  • Calibration using certified, traceable refractive-index reference liquids

Typical Applications


Food & Beverage
  • Brix measurement
  • Juice and concentrate production
  • Syrup concentration
  • Beverage blending
  • Liquid-food processing

Compact Process Equipment
  • Skid-mounted systems
  • OEM process equipment
  • Production lines with limited installation space
  • Applications where local sensor indication is preferred

Process Concentration Control
  • Continuous concentration monitoring
  • Mixing and blending
  • Dilution control
  • Dosing processes
  • Product quality monitoring

Chemical Processing
  • Compatible chemical solutions
  • Concentration monitoring
  • Mixing and dilution
  • Product changeover detection

Coating-Prone Processes
  • Products prone to prism deposition
  • Processes requiring automated wash control
  • External pump/valve cleaning systems

Technical Specifications

Additional information

Product family name

PrismaTech refractometer series

Measurement parameters

Brix, Refractive index and Temperature

Contact to measured medium

Yes

Refractive Index Range

1.32500-1.54000

Brix Range

0-100%Brix

Measured media

Liquids

Ambient temperature

0 – +50°C

Power supply (VAC)

110-240 VAC

Power supply (VDC)

18-30 VDC

Process pressure

Max.16 bar (Continuous operation at 12 bar)
150 psi

Process temperature

0…95°C

Wetted Parts Matterial

AISI316L,PTFE,Titanium,Sapphire

Prism Material

Sapphire

Senosor body Material

Anodized Aluminium

Connections

3A Clamp DN63

Analogue outputs

One unit 0/4…20 mA (Brix, Temperature, PID controller, etc.)

Digital inputs

One unit (Programable as DI/DO)

Digital outputs

One unit + One unit (Programable as DI/DO)

Communications

Modbus RTU (RS485)

Cable connection

M12 8pin

Brix Measurment Accuracy

±0.1% Brix

nD Measurment Accuracy

±0.0002

Sensor protection

IP67

Transmitter protection

IP66

Display Dimensions

320×240 TFT color LCD

Transmitter

Compact with sensor

Videos & Clips of Product

Catalogue & Manual Instruction

English Catalogue

Inline Refractometer PTR100-CPT

Consultation Form

  1. You can call us by methods of Contact Us page.
  2. You can fill this form and our experts will get in touch with you as soon as possible.

Ordering Form

  1. You can call us by methods of Contact Us page.
  2. You can fill this form and our experts will get in touch with you as soon as possible.

فرم جستجو

اگر صفحه مورد نظر شما، در لیست صفحات پایین نیست. در فرم جستجو کنید.