Compact special-material Coriolis flowmeter for direct mass filling and dosing of corrosive and demanding process liquids.
MassFill 8000 is the special-material configuration of the MassFill Coriolis filling platform, developed for applications where Stainless Steel 316L is not the preferred measuring-tube material.
Measuring tubes are available in Titanium, Tantalum or Hastelloy C22, allowing the meter configuration to be selected according to the chemical and mechanical requirements of the process medium. Material compatibility should always be evaluated against the actual fluid composition, concentration, temperature and operating conditions.
Direct Coriolis measurement provides mass-flow information without relying on liquid conductivity. Density, temperature and volume-flow information are also available, enabling the meter to handle process liquids whose physical properties or conductivity may differ significantly between products.
Batch Filling and Tri-State Filling support quantity-controlled filling and Low–High–Low filling profiles. A configurable pulse output up to 4 kHz and three selectable I/O configurations provide the machine controller with the interfaces required for automated filling and dosing sequences.
The compact, displayless transmitter operates from 18–30 V DC and provides Modbus RTU over RS-485 for digital machine integration. An optional PrismaTech HMI can be connected where local or remote operator access is required.
MassFill 8000 is available only in compact configuration and supports CIP/SIP operation within specified operating limits, combining special-material Coriolis measurement with a machine-oriented filling transmitter.
| Measuring Principle | Coriolis |
| Measured Variables | Mass Flow, Volume Flow, Density, Temperature |
| Mass Flow Measuring Range | 0 to 350,000 kg/h, depending on nominal size |
| Mass Flow Accuracy – Liquid | ±0.15% of reading standard; ±0.10% of reading optional |
| Mass Flow Accuracy – Gas | ±0.75% of reading |
| Mass Flow Repeatability – Liquid | ±0.075% standard; ±0.05% optional |
| Density Accuracy – Liquid | ±0.5 kg/m³ under reference conditions |
| Density Repeatability – Liquid | ±0.25 kg/m³ |
| Totalizers | 2 independent totalizers with selectable units |
| Pulse Output | Configurable quantity per pulse |
| Maximum Pulse Frequency | 4 kHz |
| Filling Functions | Batch Filling / Tri-State Filling |
| Nominal Size Range | DN8 to DN100 |
| Measuring Tube Material | Titanium Grade 9 / Tantalum / Hastelloy C22 |
| Surface Treatment | Electropolishing available |
| Process Connection Wetted Parts | Stainless Steel 316L |
| Sensor Housing Material | Stainless Steel 304 |
| Transmitter Housing Material | Stainless Steel 304 standard; Stainless Steel 316 optional |
| Installation Configuration | Compact only |
| Process Connections | Flanged / Clamp |
| Available Flange Standards | ASME B16.5 / EN 1092-1 / JIS B2220 |
| Standard Flange Configuration | ASME B16.5 Class 150 |
| Max. Process Pressure – Flanged | PN100 / ASME Class 600 / JIS 63K |
| Available Clamp Standards | DIN 32676 / ASME BPE |
| Fluid Temperature Range | −50 to +150 °C |
| Ambient Temperature Range | −20 to +60 °C |
| Degree of Protection | IP67 |
| CIP/SIP Capability | Suitable for CIP cleaning and SIP sterilization within specified operating limits |
| Power Supply | 18–30 V DC only |
| Electrical Connection | 8-pin M12 connector |
| Digital Input | 1 × configurable digital input |
| Digital Output | According to selected I/O configuration |
| Switch Output | Galvanically isolated solid-state switch output, normally open |
| Switch Technology | PhotoMOS solid-state switching |
| Pulse Function | Configurable through digital output; maximum frequency 4 kHz |
| Configuration | Available I/O |
|---|---|
| 1 | 1 × Digital Output + 1 × Digital Input + Modbus RTU |
| 2 | 2 × Digital Outputs + 1 × Digital Input + Modbus RTU |
| 3 | 1 × Galvanically Isolated Solid-State Switch Output + 1 × Digital Input + Modbus RTU |
| Digital Communication | Modbus RTU over RS-485 |
| External HMI | Optional PrismaTech HMI via Modbus RTU over RS-485 |
| Calibration | Flow calibration performed under ISO/IEC 17025 accreditation |
| Quality Management | ISO 9001 / ISO 29001 |
| Manufacturing Compliance | GMP requirements |