MassFill 6000 | Coriolis Mass Flowmeter

Product Specifications

Compact Coriolis flowmeter for direct mass-based filling and dosing, with 316L measuring tubes, dedicated filling functions and machine-ready digital integration.

  • Direct mass-flow measurement for conductive and non-conductive liquids
  • Simultaneous mass flow, density, temperature and volume-flow information
  • Batch Filling and Tri-State Filling with Low–High–Low filling sequence
  • Configurable pulse output up to 4 kHz
  • Three selectable I/O configurations and Modbus RTU over RS-485
  • Compact, displayless design with optional external PrismaTech HMI
SKU N/A Category

Description

MassFill 6000 is a compact Coriolis flowmeter developed specifically for mass-based filling, dosing and batching applications. By directly measuring mass flow, the instrument can be used with both conductive and non-conductive liquids, making it suitable for filling processes where product conductivity varies or electromagnetic measurement is not applicable.

The series uses Stainless Steel 316L measuring tubes and provides mass flow, density, temperature and volume-flow information from a single measuring point. Standard liquid mass-flow accuracy is ±0.15% of reading, with ±0.10% available as an option, while density accuracy is ±0.5 kg/m³ under reference conditions.

MassFill 6000 combines the Coriolis measuring platform with a compact, displayless transmitter designed for direct machine integration. Power, I/O and Modbus RTU communication are provided through an 8-pin M12 connector, reducing the need for additional field-mounted interfaces around each filling point.

Dedicated filling functions include Batch Filling and Tri-State Filling. Tri-State Filling uses a Low–High–Low sequence, allowing the filling cycle to begin at reduced flow, operate at a higher rate during the main filling stage and return to reduced flow near the end of the cycle. This provides greater control over the filling profile and can also be useful for products prone to foaming during rapid filling.

Three selectable I/O configurations allow the electrical interface to be adapted to different machine-control architectures. A configurable pulse output supports frequencies up to 4 kHz, while Modbus RTU over RS-485 provides digital access to instrument parameters and operating information.

Where an operator interface is required, the optional PrismaTech HMI can be connected through Modbus RTU. The compact-only architecture, stainless-steel construction and CIP/SIP capability make MassFill 6000 suitable for automated filling, dosing and batch systems requiring direct mass measurement and straightforward machine integration.

0/5 (0 Reviews)

Features & Options


Mass-Based Filling
  • Direct Coriolis mass-flow measurement
  • Conductive and non-conductive liquids
  • Density and temperature measurement
  • Volume-flow information
  • Batch Filling
  • Tri-State Low–High–Low Filling

Performance
  • DN8–DN100
  • Up to 350,000 kg/h depending on size
  • ±0.15% liquid standard
  • ±0.10% liquid optional
  • Density accuracy ±0.5 kg/m³
  • Density repeatability ±0.25 kg/m³

Machine Integration
  • Compact-only transmitter
  • Displayless architecture
  • 18–30 V DC
  • 8-pin M12
  • Three selectable I/O configurations
  • Pulse up to 4 kHz
  • Modbus RTU
  • Optional PrismaTech HMI

Process Construction
  • 316L measuring tubes
  • SS304 sensor housing
  • Flanged / clamp connections
  • −50…+150 °C
  • CIP/SIP
  • IP67

Typical Applications

  • Edible oils and non-conductive liquids
  • Beverage ingredients and syrups
  • Chemical dosing
  • Batch ingredient addition
  • Mass-based container filling
  • Multi-product filling lines
  • Blending and recipe preparation
  • OEM filling and dosing machines

Technical Specifications

Additional information

Compact, displayless Coriolis filling flowmeter with Stainless Steel 316L measuring tubes for mass-based filling, dosing and batch applications, featuring dedicated filling functions, selectable I/O configurations and Modbus RTU connectivity.

1. Measurement & Performance

Measuring PrincipleCoriolis
Measured VariablesMass Flow, Volume Flow, Density, Temperature
Mass Flow Measuring Range0 to 350,000 kg/h, depending on nominal size
Mass Flow Accuracy – Liquid±0.15% of reading standard; ±0.10% of reading optional
Mass Flow Accuracy – Gas±0.75% of reading
Mass Flow Repeatability – Liquid±0.075% standard; ±0.05% optional
Density Accuracy – Liquid±0.5 kg/m³ under reference conditions
Density Repeatability – Liquid±0.25 kg/m³
Totalizers2 independent totalizers with selectable units
Pulse OutputConfigurable quantity per pulse
Maximum Pulse Frequency4 kHz
Filling FunctionsBatch Filling / Tri-State Filling

2. Process & Mechanical

Nominal Size RangeDN8 to DN100
Measuring Tube MaterialStainless Steel 316L
Surface TreatmentStandard finish
Process Connection Wetted PartsStainless Steel 316L
Sensor Housing MaterialStainless Steel 304
Transmitter Housing MaterialStainless Steel 304 standard; Stainless Steel 316 optional
Installation ConfigurationCompact only
Process ConnectionsFlanged / Clamp
Available Flange StandardsASME B16.5 / EN 1092-1 / JIS B2220
Standard Flange ConfigurationASME B16.5 Class 150
Max. Process Pressure – FlangedPN100 / ASME Class 600 / JIS 63K
Available Clamp StandardsDIN 32676 / ASME BPE
Fluid Temperature Range−50 to +150 °C
Ambient Temperature Range−20 to +60 °C
Degree of ProtectionIP67
CIP/SIP CapabilitySuitable for CIP cleaning and SIP sterilization within specified operating limits

3. Electrical & I/O

Power Supply18–30 V DC only
Electrical Connection8-pin M12 connector
Digital Input1 × configurable digital input
Digital OutputAccording to selected I/O configuration
Switch OutputGalvanically isolated solid-state switch output, normally open
Switch TechnologyPhotoMOS solid-state switching
Pulse FunctionConfigurable through digital output; maximum frequency 4 kHz
Selectable I/O Configurations
ConfigurationAvailable I/O
11 × Digital Output + 1 × Digital Input + Modbus RTU
22 × Digital Outputs + 1 × Digital Input + Modbus RTU
31 × Galvanically Isolated Solid-State Switch Output + 1 × Digital Input + Modbus RTU

4. Communication, Display & Approvals

Digital CommunicationModbus RTU over RS-485
External HMIOptional PrismaTech HMI via Modbus RTU over RS-485
CalibrationFlow calibration performed under ISO/IEC 17025 accreditation
Quality ManagementISO 9001 / ISO 29001
Manufacturing ComplianceGMP requirements

Videos & Clips of Product

Catalogue & Manual Instruction

English Catalogue

MassFill 6000 | Coriolis Mass Flowmeter

Consultation Form

  1. You can call us by methods of Contact Us page.
  2. You can fill this form and our experts will get in touch with you as soon as possible.

Ordering Form

  1. You can call us by methods of Contact Us page.
  2. You can fill this form and our experts will get in touch with you as soon as possible.

فرم جستجو

اگر صفحه مورد نظر شما، در لیست صفحات پایین نیست. در فرم جستجو کنید.