Ceramic-lined electromagnetic filling flowmeter for abrasive conductive liquids and demanding filling applications, with a wide process-temperature range and dedicated filling functions.
MagFill 8000 is a compact electromagnetic flowmeter developed for volumetric filling and dosing of electrically conductive abrasive liquids and process media operating under demanding conditions. Its defining feature is a Zirconia Ceramic (ZrO₂) liner, providing a dedicated measuring configuration for applications where resistance to abrasive service is an important requirement.
The series is manufactured in DN15 and can be supplied with flanged or clamp process connections. Stainless Steel 304 is used as the standard material for both sensor and transmitter housings, while Stainless Steel 316 is available as an option. Titanium Grade 2 electrodes are standard.
The Zirconia Ceramic-lined measuring section supports fluid temperatures from −40 to +150 °C. MagFill 8000 is also suitable for CIP cleaning and SIP sterilization within its specified operating limits, allowing it to be used in production lines that combine demanding process media with repeated cleaning or sterilization cycles.
MagFill 8000 measures volumetric flow and transferred volume without moving mechanical measuring elements. A configurable pulse output provides volume-proportional information to the filling-machine controller at frequencies up to 4 kHz, while three selectable I/O configurations allow the electrical interface to be adapted to different machine-control architectures.
Dedicated filling functions include Batch Filling and Tri-State Filling. Tri-State Filling follows a Low–High–Low flow profile: the filling cycle begins at a reduced flow rate, continues at a higher rate during the main filling stage and returns to reduced flow near the end of the cycle. This provides greater control over the filling profile and can also be useful for liquids that may generate foam when filled rapidly.
The compact, displayless transmitter is integrated into the stainless-steel sensor assembly. An 8-pin M12 connector provides the interface for power, I/O and RS-485 communication, supporting practical integration into filling machines and OEM equipment.
Modbus RTU over RS-485 provides digital access to instrument parameters and operating data. Where an operator interface is required, an optional PrismaTech HMI can be connected via Modbus RTU for remote configuration and operation.
With its Zirconia Ceramic liner, stainless-steel construction, wide fluid-temperature range and dedicated filling functions, MagFill 8000 is positioned for abrasive conductive liquids and demanding filling applications where a ceramic-lined measuring path is preferred.