Benchtop Conductivity Meter PTMul-4

Product Specifications

Benchtop Multiparameter Meter for Conductivity, TDS, Salinity, Resistivity and Temperature

  • Direct measurement of Conductivity and Temperature
  • Calculated TDS, Salinity and Resistivity
  • Conductivity range: 0.1 µS/cm to 200 mS/cm
  • 4 automatic conductivity measurement ranges
  • Conductivity accuracy: ±1% FS of the active range
  • Four-ring SS316L conductivity probe
  • TDS calculation using internal conversion table
  • Salinity calculation according to PSS-78
  • Resistivity calculated from measured Conductivity
  • Integrated Pt100
  • 7-inch color touchscreen
  • Storage for up to 6,000 measurement results
  • CSV export and Modbus communication

Description

PTMul-4 is a benchtop multiparameter laboratory instrument built on the same four-ring conductivity measurement platform used for precision laboratory conductivity measurement. Its hardware directly measures Conductivity and Temperature, while additional parameters are generated by the software from the measured conductivity data.

Conductivity is measured from 0.1 µS/cm to 200 mS/cm using four automatically selected ranges: 0–200 µS/cm, 0.2–2 mS/cm, 2–20 mS/cm and 20–200 mS/cm. Automatic range selection allows the measurement electronics to adapt to the conductivity level of each sample.

Conductivity accuracy is ±1% of the Full Scale of the active measurement range. Resolution is 0.1 µS/cm in the micro-siemens range and 0.001 mS/cm in the milli-siemens ranges.

TDS is calculated by the instrument from measured conductivity using an internal conductivity-to-TDS conversion table. This allows the software to derive TDS from the electrical conductivity response rather than requiring a separate TDS sensor.

Salinity is calculated according to PSS-78, the Practical Salinity Scale 1978. Conductivity and temperature data are processed by the software to calculate the corresponding practical salinity value.

Resistivity is mathematically derived from Conductivity and therefore does not require a separate sensor. Based on the conductivity measurement capability of the instrument, the corresponding theoretical resistivity span extends from approximately 5 Ω·cm to 10 MΩ·cm.

The four-ring probe uses SS316L electrodes and includes an integrated Pt100. Temperature can be measured from 0 to 100 °C with ±0.2 °C accuracy and 0.1 °C resolution. Maximum sample temperature is 80 °C, and approximately 45 mL of sample is required.

A 4.7-inch color touchscreen provides access to measurements and instrument operation. Up to 6,000 measurement results can be stored internally and exported as CSV files through USB Type-A, while USB Type-B provides Modbus communication.

0/5 (0 Reviews)

Features & Options


Multiparameter Measurement
  • Direct Conductivity measurement
  • Direct Temperature measurement
  • TDS calculation
  • PSS-78 Salinity calculation
  • Resistivity calculation

Conductivity Platform
  • Four-ring contacting probe
  • SS316L electrodes
  • 0.1 µS/cm to 200 mS/cm
  • Four automatic measurement ranges
  • ±1% FS accuracy of active range

Temperature
  • Integrated Pt100
  • 0–100 °C temperature measurement
  • Automatic temperature compensation
  • Configurable compensation coefficients
  • Maximum sample temperature 80 °C

Data & Operation
  • 4.7-inch color touchscreen
  • Up to 6,000 stored results
  • USB Type-A CSV export
  • USB Type-B Modbus communication

Laboratory Construction
  • Ø12 mm probe
  • 70 cm probe cable
  • Approx. 45 mL minimum sample
  • Compact benchtop instrument

Typical Applications

  • Water-quality laboratory analysis
  • Conductivity and TDS testing
  • Salinity analysis
  • Resistivity monitoring
  • Process-water samples
  • Chemical solutions
  • Quality-control laboratories
  • Research laboratories
  • Incoming material and final-product checks
  • Multiparameter routine laboratory testing

Technical Specifications

Additional information

Product family name

PrismaTech conductivity meter series

Product type

BPTCOND

Measurement principle

Conductivity

Measurment parameters

Conductivity, Temperature, TDS, Salinity, Resistance

Conductivity range

0-200 ms/cm

Measured media

Liquids

Ambient temperature

0-32°C

Power supply (VDC)

220 VAC

Process temperature

0-80°C

Wetted parts material

AISI316L, ABS

Case body material

Anodized Aluminium

Communications

Modbus RTU (RS485), Wifi

USB port

One port for transferring stored data as excel

Accuracy

±0.5% Full scale

Display

4.3" touch screen

Electrode Dimensions

150×22 mm

Case body Dimensions

155×145×80 mm

Videos & Clips of Product

Catalogue & Manual Instruction

English Catalogue

Benchtop Conductivity Meter PTMul-4

Consultation Form

  1. You can call us by methods of Contact Us page.
  2. You can fill this form and our experts will get in touch with you as soon as possible.

Ordering Form

  1. You can call us by methods of Contact Us page.
  2. You can fill this form and our experts will get in touch with you as soon as possible.

فرم جستجو

اگر صفحه مورد نظر شما، در لیست صفحات پایین نیست. در فرم جستجو کنید.